Original Roof rail introduction and the method to install roof rack  First of all, we must first introduce the type of vertical rails of the original roof rack. Why should we introduce the type of vertical rails first? Because the type of the vertical rail is different, the type of buckle required when installing the roof rack is different, so before introducing the roof rack, we first introduce the type of the vertical rail of the luggage rack. Raised side roof rails are one of the most common types. The structure of this longitudinal rail is mostly separated from the roof and only a few fixed points are connected to the roof. This kind of vertical rail is very convenient to install the roof rack. If you don't want to install the roof rack, you can also use the rope and net to fix the simple luggage. Models using such longitudinal rails include Chevrolet Captiva, Suzuki Jimny, Peugeot 3008, Toyota Highlander, Volkswagen Tiguan, and other models.

roof rack

Flush roof rails are also common. The Flush roof rails fit perfectly on the roof. The advantage is that the height of the luggage rack is lower than that of the raised side rails. The models that use this kind of vertical rail are Audi Q7, BMW X1, Jeep Guide, Subaru Outback and other models.

roof rack

T-slot roof rail The T-slot roof rail is not popular, Such a longitudinal rail does not affect the overall appearance of the vehicle when the roof rack is not installed, and it is convenient if the roof rack needs to be installed, and the height of the roof rack is lower than the above two types of roof rails. The models that use the T-slot vertical rail are Land Rover Discovery 3, Porsche Cayenne, Haval H3 and other models.

roof rack

No roof rail Most cars don't have vertical rails when they leave the factory, Some car manufacturers take into account the needs of the owners. In the design of the vehicle, the interface of the luggage rack is reserved. This can also be convenient. Retro luggage rack

roof rack

It is relatively simple to install the roof rack on the Raised side rack. It is only necessary to measure the distance between the front and the rear in order to prepare the bicycle rack or the trunk for later installation and then fix the roof rack on the vertical rail according to the manual. It is. Here to remind everyone that some brands of roof racks do not have anti-theft measures, which requires the owner to pay attention to the location of the parking, try to choose in a guarded parking lot or garage, not only to prevent the loss of the roof rack, but also Prevent items in the vehicle from being lost or the vehicle itself from being hurt.