Search results for 'rack'

This roof rack is suitable for most non-roof rail cars and can be used to pull the roof. If the original car has reserved screw holes, it can also be screwed directly into the roof of the car. After installation, the two sides are not prominent. Depression design, highly coordinated, $100 is for one bar, as the most time the front bar width is different from the rear one, You can buy two bars and select two different size bars to fit your car better No anyone roof rack can fit all cars, So if it is possible, you can come to our warehouse to check if the roof rack is fitted to your car. Capacity 100kg The front of the bar is thick and thin at the rear, reducing wind resistance and noise, and make it quiet when you driving on a highway Don't over-tight the knobs or bolts The front of the bar is thick and thin at the rear, reducing wind resistance and noise, and make it quiet when you driving on a highway This roof rack is also for fixed-point installation, For the Subaru car, your can reference https://kiwisafety.co.nz/subaru-outback-roof-rack.html Learn More

Bike Carrier Carrier One Bike For Installation, you can reference https://www.youtube.com/watch?v=y-829Zt7DH8 The Bike Carrier doesn't stop the license plate Easy installation and removal The Bike Carrier Fit most car Roof rack T slots mounting to roof bars and secure around mounting to the roof bar are both feasible. Learn More

Easy to install Suitable for different car sizes, the base is adjustable. The capacity is 75 KG Easy to install Car side awning We had installed this roof rack to Nissan Serena, Toyota Hulix, Mazda MPV,Mazda BT-50,Nissan Navara,Mitsubishi Triton Roof Rack In this install solution, There is no need to drill a hole in the car roof, So the installation is very easy and quick There are four kinds of Hooks to select from, It is easy to fit most car roof curve simply check three points after installation: shake the roof rack to ensure it is securely attached to your car, close both front and sliding doors to confirm proper closure, and make sure the locking rod is not tightened too much to prevent bending. Learn More

Roof Rack For Flush Roof Rail

$90 is for one bar, as most time the front bar width is different from the rear one, You can buy two bar and select two different size bar to fit your car better

Aluminum alloy universal roof rack, It is suitable for cars and vehicles like Hyundai Santa Fe, Audi Q5, Kia Sportage with flush roof rails Can be installed bike rack, roof box, ski rack, boat rack

Multiple Size ranging from 90 cm-114 cm Each one is adjustable to extend by 4 cm

Model A 82.5 CM Flush Rails inside distance 89-93 CM

Model B 86.5 CM Flush Rails inside distance 93-97 CM

Model C 90.5 CM Flush Rails inside distance 97-101 CM

Model D 94.5 CM Flush Rails inside distance 101-105 CM

Model E 98.5 CM Flush Rails inside distance 105-109CM

Model F 102.5 CMFlush Rails inside distance 109-113 CM

Width 7.5cm Capacity 150kg

After you buy now, please inform me of the width of the roof rail, front width, and back width of roof rail is different, shown in photo number seven or you can select directly by yourself Model A-F No anyone roof rack can fit all car, So if it is possible, you can come to our warehouse to check if the roof rack is fit for your car. The real install example you can check https://kiwisafety.co.nz/blog/flush_roof_rail/

Learn More

The Toyota Hilux Roof Rack offers rugged durability and ample storage space, seamlessly integrating with the vehicle for outdoor adventures. Learn More

Raised roof rail Roof Rack

One bar is 90 and two bar is 180, as the most time the front bar width is different from the rear one, You can buy two bar and select two different size bar to fit your car better Thickened Metal Chuck

Duplicate of use metal is more stable

Anti theft lock

Panoramic Sunroof

A soft board inside and outside the package which increase the friction slip not to hurt the car paint

Learn More

Universal Roof Rack

$70 is for one bar, as most time the front bar width is different from the rear one,

You can buy two bars and select two different size bars to fit your car better Suit for the Car comes with No roof rail Inform the gap between two Gutters

after you buy it Your car gate must have a place for the hook to fix the roof rack No anyone roof rack can fit all car, So if it is possible, you can come to our warehouse to check if the roof rack is fit for your car.

For installation, you can browse https://kiwisafety.co.nz/blog/roof_rack_installation_2/

Don't over-tight the knobs or bolts,

With this roof rack, it’s a bit noise when driving at high-speed ， if you need a quiet one, We recommend https://kiwisafety.co.nz/roof-rack-universal-roof-rack.html and https://kiwisafety.co.nz/new-roof-rack.html

Learn More

$115 is for one bar, one set two bar is $230 as the most time two bar is a different size so it is better to select two sizes

This is a new design universal roof rack suit for no roof rail car, No noise,

easy to install, Totaly steel connection, easy to fit different car Product Material: Aviation aluminum alloy. stainless steel, Manganese Steel Loading capacity: 150kg Size: Width:78mm thickness:20mm Adjustable Length: 8cm Color: Shaft: Silver. Heads on both sides: black Support reserve bolt hole connection, the reserve bolt hole is generally located under the rain gutter strip or cover. reference as photo 10 We gas install this roof rack for Nissan Serena, Toyota Hulix Learn More

Subaru outback comes with one inside lip flush roof rail One bar is $115, two bar is $230 this one is a special design for old series Subaru outback car The front of the bar is thick and thin at the rear, reducing wind resistance and noise, and making it quiet when you driving at high way The real install example you can check https://kiwisafety.co.nz/blog/Subaru_Outback_Roof_Rack/

Suzuki Grand Vitara Learn More