Can I fit a roof rack on a Nissan NV200 without drilling?

Yes. The NV200 has six factory M8 mounting points on the roof. The cross bars bolt directly into these holes, so no drilling is required.

What is the load capacity of a Nissan NV200 roof rack?

Each bar is rated to 50 kg. Two bars give a recommended combined dynamic load of up to 100 kg. A third bar improves distribution for longer or heavier loads.

How much does a Nissan NV200 roof rack cost in NZ?

Bars are NZ$135 each. Most customers fit two or three bars depending on their load needs.

Home >
Roof Racks >
Nissan NV200 roof rack

Nissan NV200 roof rack

Friday, 16 February 2024 5:55:55 pm Pacific/Auckland

Installing a roof rack on the Nissan NV200 is straightforward and does not require any drilling. The NV200 comes with factory-prepared mounting points on the roof, allowing the cross bars to bolt on securely and cleanly.

Quick Fitment Guide — Nissan NV200

Generation	Years	Roof Type	Fit Method	Fit Kit	Bar Length	Load (per bar)	No-Drill
NV200	2009–present	Bare van roof / 6 factory M8 points	M8 bolt, fixed point	No	1.4 m	50 kg	Yes

Fitted in-house on Japanese-import NV200 vans at our Glenfield Auckland workshop.

Installation Steps

Locate the Factory Mounting Points The NV200 roof has six factory M8 bolt mounting points. Remove the rubber covers to access the threaded holes.

Position the Cross Bars Place the cross bars on the roof and align each base with the factory mounting points on both sides of the vehicle.

Bolt the Bases into Place Use the supplied M8 bolts to fasten the bases directly into the factory holes.

No drilling required

Only basic hand tools (socket or wrench) are needed Check for Stability After tightening all bolts, gently shake the bars to ensure they are firmly secured with no movement. Load Rating Maximum load per bar: 50kg

Recommended combined dynamic load for two bars: up to 100kg

Adding a third bar can improve load distribution and stability for longer or heavier items..