Toyota Alphard roof rack
Friday, 24 February 2017 3:00:26 pm Pacific/Auckland
The Toyota Alphard is one of Auckland's most popular family vans — and one of the trickiest vehicles to find a roof rack for. Unlike SUVs with built-in rails, the Alphard has a smooth, naked roof that requires a specialist fitting approach. At Kiwisafety, we have installed roof racks on dozens of Alphards and Vellfires in our Glenfield workshop, and we've learned that not every Alphard roof is the same. Some take a standard door clamp; others need a different method. This guide explains how to tell which one you have and how each is fitted.
Call us: 09 215 3695 | View Products | Book Installation
Do the Toyota Alphard and Vellfire Use the Same Roof Rack?
Yes. The Toyota Alphard and Toyota Vellfire share the same platform, body structure, and roof dimensions. Any roof rack that fits one model will also fit the other.
What Size Roof Rack Fits the Toyota Alphard?
- Bar length: 1.5 metres per bar
- Number of bars: 2 bars for most uses; 3 bars for heavy-duty loads
- Load capacity: Rated 50 kg per bar (100 kg for a pair). Never exceed your vehicle's roof load limit in the owner's manual – whichever is lower applies.
First: Check Which Alphard Roof Type You Have
Open the front door and look at the top edge of the door opening, where the roof meets the door frame.
- Type A — Hook-compatible: there is a lip along the door frame that a rack hook can wrap around securely. These vans use our standard door clamp kit.
- Type B — Not hookable, but with factory mounting holes: the door frame shape gives a hook nothing to grip. However, Toyota has built pre-set mounting holes into the roof edge, under the black rubber roof moulding. For these vans we fit a modified bracket that bolts straight into those factory holes.
Not sure which you have? Send us a photo of your door frame edge and we'll confirm before you order.
Three Installation Options
Option 1: Door Clamp (Type A Roofs — No Drilling)
Clamps securely to the door frame — no holes, no permanent changes. Perfect for roof boxes, surfboards, and luggage. Takes 10-20 minutes to install and can be removed at any time.
Option 2: Bolt-On Bracket to Factory Mounting Points (Type B Roofs — No Drilling)
On Alphards where the hook can't grip, we modify the standard hook into a flat L-shaped steel bracket. The top of the bracket bolts to the rack foot, and the bottom flange bolts into Toyota's own pre-set hole in the roof edge. Because it uses the factory mounting point, there is still no drilling — and the result is an exceptionally solid, rattle-free fit.
Modified L-bracket bolted into the Alphard's factory mounting point — no drilling, no door-frame hook needed.
Option 3: Riveted to Roof (Heavy-Duty)
For heavy loads like ladders or timber. Bars are riveted to the roof for maximum stability at highway speeds. Permanent but significantly stronger.
Step-by-Step Installation
Door Clamp (Type A)
- Clean the roof where the foot pads will sit, to avoid scratches and improve grip.
- Pre-assemble the feet onto the bars and set the spacing to roughly match your roof width.
- Position the bars on the roof, front and rear, at the spacing you need (for a roof box, match the box's mounting clamps).
- Fit the hooks into the door frame lip and connect them to the feet.
- Tighten evenly, alternating side to side, until the feet sit firmly. Don't over-tighten — the rubber pads should compress slightly, not flatten.
- Close the doors gently and check they shut and seal properly.
Bolt-On Bracket (Type B)
- Locate the mounting points. Carefully lift the black rubber moulding along the roof edge to expose the factory pre-set holes.
- Clean the holes of dirt and grit.
- Pre-assemble the feet and bars, and lay them on the roof so each foot lines up with a mounting hole.
- Attach the L-bracket to the rack foot, with the lower flange sitting flat on the roof edge over the hole.
- Bolt down with the supplied stainless bolt and washer. A small amount of sealant on the thread helps keep water out.
- Tighten the bracket bolt and foot bolt firmly and evenly on all four corners.
- Refit the moulding as far as possible around the brackets.
Final Checks (All Methods)
- Push and pull each bar firmly — there should be no movement.
- Check all doors open and close normally.
- Re-check all bolts after the first 50-100 km, and periodically after that.
- Stay within your vehicle's roof load limit (see the owner's manual), including the weight of the rack and any roof box.
Pricing
| Item | Price (NZD) |
|---|---|
| 1 x Roof Rack Bar (1.5m) | $135 |
| 2 x Roof Rack Bars (most common) | $270 |
| 3 x Roof Rack Bars (heavy duty) | $405 |
| Professional Installation (Auckland) | $45 |
Real Customer Installations
Why Choose Kiwisafety?
- Specialists in Alphard and Vellfire roof racks — including roofs other installers can't fit
- Affordable pricing — much cheaper than Thule or Prorack
- Professional installation available in Auckland
- Two no-drill options — door clamp, or bolt-on to factory mounting points
- Local Auckland business — call us on 09 215 3695
Frequently Asked Questions
Can I fit a roof rack on a Toyota Alphard without drilling?
Yes. Most Alphards take our door clamp roof rack, which needs no drilling. On Alphards where a door clamp can't grip, we bolt a modified bracket into Toyota's own factory mounting holes — also no drilling.
Why won't a standard clamp roof rack fit my Alphard?
Some Alphards have a door frame shape that leaves no lip for a hook to grip. These vans have pre-set mounting holes under the roof-edge moulding, so we use a modified L-bracket that bolts into those holes instead.
How do I know which Alphard roof type I have?
Open the front door and check the top of the door frame. If there's a lip a hook can wrap around, you can use the door clamp. If not, you'll need the bolt-on bracket. Send us a photo and we'll confirm.
How much does a Toyota Alphard roof rack cost in NZ?
Bars start from $135 each. Most customers buy 2 bars ($270 total). Installation is an additional $45.
Does the roof rack fit the Toyota Vellfire too?
Yes. The Alphard and Vellfire share the same body structure, so the same roof rack and fitting methods apply to both models.
How long does installation take?
Door clamp installation takes 10-20 minutes. Bolt-on bracket installation takes around 20-30 minutes. Riveted installation takes 30-60 minutes.
Can I fit a roof box on top of the roof rack?
Yes. Our bars are compatible with most roof boxes. We also sell roof boxes — view our roof box range here.
What is the maximum load capacity?
Rated 50 kg per bar (100 kg for a pair). Never exceed your vehicle's roof load limit in the owner's manual – whichever is lower applies.
What size roof rack fits a Toyota Alphard?
The Toyota Alphard takes a two-bar setup of the 1.5 m Heavy Duty Roof Rack (NZ$135 per bar) due to its wider roof. Rated at 50 kg per bar and up to 100 kg combined dynamic load, with clamp mounting and no drilling. Fitted in-house at our Glenfield, Auckland workshop.
Ready to order? Shop Roof Racks | Contact Us | 09 215 3695 | 14/77 Porana Road, Glenfield, Auckland
Looking for Extra Storage? Add a Roof Box
A roof rack gives you the bars — but if you want fully enclosed, weatherproof storage for road trips or ski season, pair it with one of our roof boxes NZ.
Our 600L roof box fits most Alphard setups:
- Waterproof and lockable
- Easy 10-minute install, no tools required
- Auckland pickup available







